TOW 2011: Course Descriptions

There are four types of courses to be offered at the Technical Operations Workshop (TOW). All courses have a time slot of 75 minutes; then a 15-minute overlay time follows to be used for final questions and change of class rooms for the subsequent class.

Back to top

Operations Workshops

Operations Workshops are hands-on sessions with a maximum of about 5-7 participants each.

Title: Experiment Pre-checks and Operations
Teachers: Rich Strand and Mike Poirier
Grade level: beginners and advanced levels; some new material.
Description: This is a double-length class that will include both pre-checks and operations. This class is offered with two formats. One format is for students with stronger English skills and will move at a faster pace. The other format is for students with weaker English skills, will move at slower pace, and have more pauses for material that may be difficult to understand in translation. Pre-checks: We will practice all of the procedures and operational tests that should be performed before each experiment to insure that all of the equipment is set up and working properly, starting with drudging the schedule file and ending with pre-session e-mail to ops. Pointing and gain calibration will be covered in separate workshops. This class is for people who use Mark IV, VLBA, or VLBA4 racks, and any type of recorder, including Mark 5A and Mark 5B recorders. The class will use the Westford Mark IV system, with appropriate notes made about differences for other systems. Operations: We will practice experiment operations from starting the schedule to the post-session operational report and recovery from power failures and other disasters that can occur during a session. The use of the "logpl" program for plotting data from the log during and after the experiment will be demonstrated. This class will be held at Westford, using the Mark IV and Mark 5 recorders.

Title: Mark 5 Advanced Topics
Teacher: Dan Smythe
Grade level: Advanced; some new material.
Description: What operators don't need to know about Mark 5, but should. This workshop will focus on Mark 5B(+) and will cover advanced topics not covered in the Experiment Operations Workshop. Trouble-shooting tools and techniques will be demonstrated. Theory of operation will be discussed to provide a deeper understanding of what is happening inside a Mark 5B DIM, and how it affects operations.

Title: Troubleshooting without a Mark IV Decoder
Teacher: Dan Smythe
Grade level: Advanced; some new material.
Description: This workshop addresses possibilities about how operators can troubleshoot problems without a Mark IV decoder.

Title: Cryogenic System and Receiver Maintenance
Teacher: Jay Redmond
Grade level: Beginners.
Description: This workshop will address cryogenic system and receiver maintenance from the operational perspective. The goal is to improve system reliability, reduce downtime, and lower operational cost. Workshop participants will receive helpful hints for recovery from vacuum failures, contaminated helium systems, and the use of standardized maintenance procedures with some common pitfalls identified. General cryogenic "Do's and Don'ts" will be discussed. This session will not address the theory of cryogenics or the internal workings of a dewar.

Back to top

Maintenance Workshops

Maintenance workshops are presentations or demonstrations to an audience of 10 or fewer people, with discussion and questions. There may be some hands-on training.


Title: Mark 5 Disk Module Testing and Shipment
Teacher: Don Sousa
Grade level: Beginners.
Description: The first part of this workshop will lead participants through the testing and conditioning of Mark 5 disk modules. Topics will include the erasing and conditioning of a module, guidelines for mechanical inspection, and repair of detected mechanical damage. The second part will deal with preparing the modules for shipment, including labelling techniques and customs procedures.

Title: Automated Pointing Models Using the FS
Teacher: Ed Himwich
Grade level: Beginners and advanced levels.
Description: This class will be offered at two levels. One level will concentrate on basics for students who do not have much experience with the tools presented and want an introduction. The other level will be for students with more experience or want to address more advanced topics. The course will cover basic support for pointing measurements in the Field System. It will also include a demonstration of the "pdplt" program for analyzing pointing data. It will describe basic principles for configuring the mdlpo.ctl and ctlpo.ctl files that control the automated pointing data acquisition and delogging processes. Gain calibration will be covered in separate workshops.

Title: Antenna Gain Calibration
Teacher: Michael Lindqvist
Grade level: Beginners; some new material.
Description: This course covers using ONOFF and GNPLT. Instruction will be given on the preparation and execution of ONOFF for the automatic acquisition of amplitude calibration data. Attendees will learn about the necessary procedure files, methods of measuring noise diode temperature and gain curves, and the interpretation of the resulting log files. The course will provide basic instruction on analyzing gain calibration data with GNPLT. Typical tasks (such as calibration of Tcal and gain curves) will be described step-by-step, a general discussion about GNPLT data analysis capabilities will also be held. Some time will be reserved to include the possibility of giving feedback and requesting improvements in the features of the gain calibration tools.

Title: Generating ANTAB Tsys Files (ANTABFS)
Teacher: Bob Campbell
Grade level: Beginners; some new material.
Description: ANTABFS is used at astronomy stations to format Tsys data for use in analysis. Currently, this is not used for geodesy, but will be eventually. This course does not need to be attended by students from geodesy only stations. This class will describe use of the ANTABFS suite of scripts for producing well-calibrated and formatted system temperature and gain curve tables, suitable for use in the common data analysis packages. It will include some explanation of how the information is obtained and why good quality amplitude calibration is important; and some examples of typical errors will be presented. There will be a live demonstration of the scripts.

Title: RFI Sources, Identification, Mitigation
Teacher: Brian Corey
Grade level: Beginners.
Description: This workshop will discuss sources of interference that might affect VLBI observations. Particular emphasis will be placed on the levels and types of RFI that are most harmful to experiments. Also discussed will be techniques to identify RFI and (the limited range of) techniques to deal with it.

Title: Spectrum Analyzer Testing of Analog RF Systems
Teacher: Brian Corey
Grade level: Beginners.
Description: This course will review the fundamentals of measuring a power spectrum with an analog RF or FFT-based spectrum analyzer. Applications to VLBI system testing and trouble-shooting will be discussed and demonstrated, with a particular emphasis on phase noise and modulation in LO and phase calibration systems. The detection of spurious phase cal signals with a spectrum analyzer will also be treated, along with the diagnosis and cure of such signals.

Title: Hardware Maintenance
Teacher: Rich Strand and Mike Poirier
Grade level: Beginners.
Description: This workshop will cover checkout and maintenance aspects of the VLBI electronic racks. Areas to be covered include formatter checkout, VC/BBC performance, and IF distributor checkout.

Title: Hydrogen Maser Monitoring and Maintenance
Teacher: Irv Diegel
Grade level: Beginners.
Description: The intent of this workshop is to provide VLBI personnel with an overview of the hydrogen maser and its use in VLBI. The discussion will be generic so as to accommodate the different types of masers used throughout the VLBI network. Topics will include block diagram analysis of the physics and electronics systems as well as generalized operational procedures.

Title: Mark 5 OS and Mark 5C Software Development
Teacher: Chet Ruszczyk
Grade level: Beginners.
Description: The Mark 5 VLBI and eVLBI community needs a stable and up-to-date OS to help continue the development of technologies and maintain a secure environment. After considerable investigation, we have selected a Debian-based distribution as the new OS and will explain the deployment and upgrade for current Mark 5 systems out in the community. Moving the Mark 5 to a Debian-based OS will make the Mark 5 more similar to FS, which is also Debian based. The reasons for moving to the new OS will be explained, as well as the details of making the changeover and the differences that will be encountered.

Title: General Station Troubleshooting
Teachers: Ed Himwich and Brian Corey
Grade level: Beginners.
Description: This course is intended to provide a description of the tests that stations should periodically perform to evaluate the performance of their station. These checks are more advanced than the ones covered in the Experiments Pre-checks and Operations course, but most are covered in more detail in other courses. This course works through the list of checks, explains the reasons for the tests, provides some tips on performing them, how to use systests scripts for automating and analyzing measurements, and a chance to ask questions about them. The systests scripts are an important tool for testing and verification for stations that have Mark IV Decoders. They will be expanded in the future to support stations that do not have Decoders, but do have Mark 5B recorders. In order to have a full grounding in this material it is recommended that anyone signing up for this course should also take some other courses unless they are already familiar with the material in these courses. The recommend other courses are: RFI Sources, Identification, Mitigation, Phase Calibration Basics, and Spectrum Analyzer Testing of Analog RF Systems. Some additional material on troubleshooting not covered in other courses will be presented here.

Back to top

Seminars

Seminars are presentations including demonstrations to an audience of 10 or more people, depending on the topic.

Title: Introduction to the K5 System
Teacher: Kensuke Kokado
Grade level: Beginners.
Description: This seminar will describe the K5 system being developed in Japan. The entire data acquisition functions and correlator functions can be performed on a common PC system running on Linux or FreeBSD. The K5 system is now regularly used at IVS stations in Japan and at Syowa station in Antarctica. Actual data acquisition and some post-observation data checks will be demonstrated.

Title: Understanding Correlator Feedback
Teachers: Mike Titus, Alessandra Bertarini, and David Hall
Grade level: Beginners; some new material.
Description: This seminar covers the coordination of observations, the logistics of media distribution, the set up of correlation, the analysis of results and the feedback to stations. Particular emphasis will be on correlator-station communication from the station reports and logs to correlator feedback. Representatives from the correlators will be available for discussions and advice on issues regarding your station.

Title: Linux System Administration
Teacher: Jonathan Quick
Grade level: Beginners.
Description: This course will cover system configuration and management issues outside the normal course of experiment operations. The "fsadapt" program which can be used to simplify many of these tasks will be described.

Title: Pointing and Single Dish Amplitude Calibration Theory
Prospective teachers: Bob Campbell
Grade level: Beginners.
Description: In this course students will learn why accurate pointing corrections must be known for all parts of the sky to be observed, and how pointing errors affect geodetic and astronomical results. Students will learn how SEFD and system temperature measurements are related, how to check the focus, how to make SEFD measurements, how to measure a gain curve, which sources are best for the SEFD measurements, how weather can affect the measurements and results, and how the SEFD measurements are used for data analysis and scheduling. We will also discuss measurement equipment and how it may affect the results if care is not taken.

Title: Timing Systems
Prospective teachers: Richard Hambly
Grade level: Beginners.
Description: This presentation will discuss all the reasons for needing high-accuracy time and frequency in VLBI. This will include a discussion of all the "clocks" used in VLBI (Hydrogen Masers, GPS timing clocks, the clocks inside the Field System computer and the clock information needed by the correlators) and how they need to be tied together in order to guarantee successful VLBI measurements.

Title: Writing Station Specific FS Code
Teacher: Ed Himwich
Grade level: Beginners and advanced levels.
Description: This course will cover useful information about how to implement station specific code to work with the FS. This includes the programs "antcn" and "stqkr" primarily, but also "cheks", "sterp" and also how to add station-specific help pages. We intend to provide only one level of instruction for this topic. It will combine "beginning", "intermediate", and "advanced" topics, but perhaps lean towards "beginning" and "intermediate". There should be time to deal with some detailed problems at all levels. You should have some experience with FORTRAN and C if you sign up for this section. A separate ad hoc section for discussing implementation of specific features at audience request is also available as "Topics in FS station software coding".`

Title: Topics in FS Station Software Coding
Teacher: Ed Himwich
Grade level: Advanced.
Description: This session will be organized as a group discussion/demonstration. It will provide an opportunity for people to present questions they have about implementing specific station features and to get advice on how to do it. A separate lecture covering more of the basics of station software coding is covered in the "Writing station specific FS code" lecture.

Title: Phase Calibration Basics
Teacher: Brian Corey
Grade level: Beginners.
Description: The phase calibration system is the primary means for ensuring that instrumental effects in the receiver and VLBI terminal do not corrupt the group delay measurements. This course will cover the basic concepts and hardware implementation of the calibration system, including the Mark IV cable measurement system. The nature and causes of spurious signals, which can degrade the calibration accuracy, will be described.

Title: Digital Backends and Digital Processing Methods
Teacher: Chris Beaudoin
Grade level: Beginners; some new material.
Description: This seminar provides an overview over the various flavors of digital backends (DBEs) and gives an introduction into digital processing methods and techniques.

Title: DBBC Overview
Teacher: Gino Tuccari
Grade level: Beginners; new material.
Description: This seminar will give an introduction into the installation and operation of the digital backend DBBC.

Title: RDBE Overview
Teachers: Chet Ruszczyk
Grade level: Beginners; new material.
Description: This seminar will give an introduction into the installation and operation of the digital backend RDBE.

Title: e-VLBI Overview
Teacher: Chet Ruszczyk
Grade level: Beginners; some new material.
Description: The transmission of VLBI data via high-speed networks, dubbed 'e-VLBI', is developing rapidly. This seminar will explain the basics of e-VLBI. Topics covered will include general topics such as the advantages of e-VLBI and types of networks. But also more detailed questions such as how to extract data files from the Mark 5 system for e-VLBI operations will be discussed.

Title: Software Correlation
Teacher: Kensuke Kokado
Grade level: Beginners.
Description: This seminar will explain how to perform software correlation by using the K5 software correlation program suite. The actual correlation process will be demonstrated step by step with observed data sets. These steps include a-priori parameter calculation, fringe search, visualization of processed data, and distributed software correlation for mass processing.

Title: FS Remote Interface
Teacher: Alexander Neidhardt
Grade level: Beginners; new material.
Description: We will demonstrate the planned FS remote interface for users to see and offer feedback on. The related Ethernet communication infracstructure for the FS will also be briefly described.

Title: VLBI Electronics
Prospective teachers: Brian Corey
Grade level: Beginners; new material.
Description: This seminar will give an introduction on how VLBI electronics works. The VLBI signal path will be traced through a receiver/backend block diagram. It will touch on what can be monitored with the Field System and point out parallels and differences between analog (BBC/VC) and digital (DBBC/RDBE) techniques.

Title: VLBI2010 Analog Electronics
Teacher: Chris Beaudoin
Grade level: Beginners; new material.
Description: This seminar will describe the various analog eletronics parts of the VLBI2010 system. In particular, the feed, LNAs, up/down converter, and fiber links will be addressed.

Back to top

Lectures

Lectures are intended for a general audience. All attendees at the workshop are welcome to attend the lectures.


Title: VLBI Basics
Teacher: Kerry Kingham
Grade level: Beginners.
Description: This lecture will describe the VLBI technique from scheduling to data capture, to correlation and to analysis. It will cover the basic concept, observational system, delay resolution function, correlation, and observables.

Title: Mark 5 System Overview
Teacher: Alan Whitney
Grade level: Beginners.
Description: The Mark 5 system will be described at the block diagram level to give users a basic understanding of the internal workings of the system. The capabilities will be described in some detail, including strategies to deal with bad or failing disks. A short discussion of additional capabilities under development will also be presented. The information presented in this lecture will lay the groundwork for the Mark 5 workshops to follow.

Title: Impact of Operations on Data Analysis
Teacher: Ed Himwich
Grade level: Beginners.
Description: This course will describe the effect on geodetic data analysis of various problems during data acquisition. Problems such as clock breaks, bad tracks, parity errors, pointing errors, warm receivers, and late starts will be covered.

Title: Science Overview
Teacher: David Gordon
Grade level: Beginners; some new material.
Description: An overview of the scientific goals of geodetic and astrometric programs will be presented. Particular emphasis will be placed on reference frames which are the fundamental products of VLBI.

Title: Field System Near Term Future Plans
Teacher: Ed Himwich
Grade level: Beginners and advanced levels.
Description: This presentation will cover the immediate and long-term plans for Field System development. The ongoing collaboration and cooperation on the Field System among various groups will be described.

Title: VLBI2010: Origins, Status and Future
Teacher: Harald Schuh
Grade level: Beginners; new material.
Description: After a short review of the history of geodetic VLBI and a summary of recent results, the presentation will deal with future perspectives. The goals and requirements of the next generation VLBI system, called VLBI2010, will be described. Based on extensive simulation studies, strategies have been developed to significantly improve product accuracy through the use of a network of small (12-m) fast-slewing antennas. A new method for generating high precision delay measurements and improved methods for handling biases related to system electronics, deformations of the antenna structures, and radio source structures have been developed. The presentation will conclude with an overview of the various VLBI2010 projects anticipated to result in a global VLBI2010 network in the foreseeable future.

Title: Mark 6 System Development
Teacher: Alan Whitney
Grade level: Beginners; new material.
Description: A next-generation VLBI data system based completely on commercial off-the-shelf hardware (COTS) is being developed at MIT Haystack Observatory in conjunction with XCube, Inc of Nashua, NH. Several demonstrations at sustained 8-Gpbs recording have been successfully completed. The Mark 6 system will be described in detail and will be followed by a demonstration using correlated noise and subsequent correlation through a DiFX software correlator.

Back to top


Return to previous page

Further information: IVS Coordinating Center ivscc@ivscc.gsfc.nasa.gov

Last updated: March 26, 2011